Rich Solar ALPHA 2 12V 200Ah LiFePO4 Battery
Rich Solar ALPHA 2 12V 200Ah LiFePO4 Battery
Couldn't load pickup availability
Rich Solar ALPHA 2 12V 200Ah LiFePO4 Battery
The ALPHA 2 doubles the storage of a typical 100Ah battery without forcing you to build a more complicated multi-battery bank. Its 2,560Wh capacity is a strong fit for longer off-grid runtime.
Built for real off-grid use: Bluetooth monitoring, internal heating, and a 5,000+ cycle design make it ready for serious RV, marine, and cabin power.
Key Benefits
- 12.8V 200Ah LiFePO4 storage
- 2,560Wh nominal energy
- Bluetooth status monitoring
- Integrated cold-weather heating
- 5,000+ cycle design
What’s Included
- One Rich Solar ALPHA 2 12V 200Ah LiFePO4 Battery
- Integrated battery-management system (BMS)
- Manufacturer documentation
Best Uses
- Larger RV and fifth-wheel systems
- Marine house banks
- Cabin and off-grid storage
- 12V backup-power systems
- High-capacity mobile power
Full Specifications
| Model / SKU | RS-B122S |
|---|---|
| Chemistry | LiFePO4 |
| Nominal Voltage | 12.8V |
| Rated Capacity | 200Ah |
| Nominal Energy | 2,560Wh |
| Cycle Life | 5,000+ cycles |
| Monitoring | Bluetooth |
| Internal Heat | Yes |
| Battery Management | Integrated BMS |
Compatibility and Installation
Use a LiFePO4-compatible charger or inverter/charger set for the battery’s nominal voltage and charging profile. Size cables, terminals, disconnects, and overcurrent protection for the expected current. Confirm communication compatibility before relying on closed-loop BMS control. Do not wire batteries in series unless Rich Solar specifically approves that configuration. Installation must follow the manufacturer manual and applicable electrical codes.
Frequently Asked Questions
How much usable energy does it provide?
The nominal rating is 2,560Wh. Plan usable runtime after accounting for inverter efficiency, load, temperature, and your chosen depth of discharge.
Does it have low-temperature support?
The ALPHA 2 includes internal heating. Use only within the manufacturer’s published charging-temperature and heater requirements.
Can I add more battery capacity later?
Use only matching batteries in an approved configuration. Equal-length cables, balanced current sharing, matched state of charge, and proper protection are important.
Will it work with my inverter?
It can work with an appropriately sized 12V-class inverter/charger that supports LiFePO4 charging. For communication-based systems, verify the exact protocol and firmware first.
What warranty applies?
Manufacturer warranty terms apply; keep documentation and operate the battery within its published limits.
Order from AllProGenerators
AllProGenerators can help verify battery voltage, inverter compatibility, cable sizing, and system expansion before you order. Call 954-249-2314. Free shipping is available in the contiguous United States unless a freight or location exception is shown at checkout.
Share
