Renogy RV Solution 2.56kWh Complete 400W Solar Kit
Renogy RV Solution 2.56kWh Complete 400W Solar Kit
Couldn't load pickup availability
Built for RV owners who want a complete solar-and-storage system without overbuilding the rig. The Renogy RV Solution 2.56kWh combines 400 watts of roof-mounted N-Type solar, one 200Ah PRO lithium battery, a 40A MPPT controller, a 2,000W pure sine wave inverter, system monitoring, and the protection hardware required for a clean 12V installation.
This is a smart fit for a camper van, Class B motorhome, travel trailer, or weekend boondocking setup. You get meaningful battery capacity for lights, refrigeration, electronics, water pumps, and intermittent appliance use, while the 400W array helps replenish the bank when the sun is cooperating.
What Makes the 2.56kWh RV Solution Practical
- Matched Renogy components reduce compatibility guesswork.
- 400W of rigid N-Type solar gives the system a useful charging foundation.
- The 2.56kWh PRO LiFePO4 battery includes Bluetooth and self-heating features.
- A 2,000W pure sine wave inverter supplies clean 120V AC power for supported loads.
- MPPT charging, battery monitoring, fusing, cables, and mounting hardware are included.
- The layout is expandable for owners whose energy needs grow later.
Best Uses
- Weekend camping and short boondocking trips
- Camper vans and smaller RV roofs
- 12V refrigerators, lighting, fans, pumps, Starlink, laptops, and device charging
- Occasional microwave, coffee-maker, or small appliance use within inverter limits
- Owners replacing lead-acid storage with a compact smart-lithium system
Complete Kit Contents
- 2 × 200W rigid N-Type solar panels
- 1 × Rover Li 40A MPPT solar charge controller
- 1 × 12V 200Ah PRO smart LiFePO4 battery with Bluetooth and self-heating
- 1 × 2,000W 12V pure sine wave inverter
- 2 sets of Z-bracket panel mounts
- Solar entry gland and MMF + FFM branch connectors
- 10 ft 12AWG panel-to-controller adaptor kit
- 8 ft 10AWG controller-to-battery tray cables
- 250A Class T fuse, 60A ANL fuse set, 30A inline solar fuse, and fuse cables
- 500A battery monitor with shunt
Full System Specifications
| Nominal battery storage | 2.56kWh |
|---|---|
| Solar array | 400W total; 2 × 200W rigid N-Type panels |
| Inverter output | 2,000W continuous pure sine wave, 120V AC |
| Charge controller | 40A MPPT; 12V/24V auto recognition |
| Maximum PV input voltage | 100VDC |
| Battery | 12.8V, 200Ah PRO LiFePO4 |
| Battery maximum charge / discharge | 200A / 200A |
| Battery cycle life | 5,000 cycles at 80% DOD to 80% EOL under stated test conditions |
| Panel Vmp / Imp | 31.03V / 6.45A |
| Panel Voc / Isc | 37.44V / 6.85A |
| Panel efficiency | 20.7% |
| Panel dimensions | 49.7 × 30.1 × 1.2 in each |
| Panel weight | 23.4 lb each |
Frequently Asked Questions
How long will 2.56kWh last in an RV?
Runtime depends on the actual load. After inverter and system losses, a modest mix of refrigeration, lights, fans, electronics, and pumps may last through the night, while air conditioning and resistance-heating appliances consume the bank much faster.
Can it run an RV air conditioner?
The 2,000W inverter may operate some efficient air conditioners if running and surge requirements stay within its ratings. Air conditioning is energy intensive, so confirm the exact unit specifications and expect shorter battery runtime.
Does this charge while driving?
The standard kit centers on solar charging. Renogy lists a compatible DC-to-DC charger as an expansion option for alternator charging; it is not listed as part of this configuration.
Is professional installation recommended?
Yes if you are not comfortable with high-current DC wiring. Correct cable sizing, fusing, mounting, ventilation, grounding, and compliance with RV electrical standards matter.
Can the battery bank be expanded?
Expansion is possible with compatible matching batteries and correctly sized conductors, protection, and charging equipment. Confirm the supported configuration before changing the system.
Share
