Renogy PRO 12V 200Ah Smart LiFePO4 Battery with Bluetooth & Self-Heating
Renogy PRO 12V 200Ah Smart LiFePO4 Battery with Bluetooth & Self-Heating
Couldn't load pickup availability
Renogy PRO 12V 200Ah Smart LiFePO4 Battery
The Renogy PRO 12V 200Ah battery delivers 2,560Wh in one rugged, intelligent deep-cycle battery. It is made for bigger RV, marine, overland, cabin, and off-grid loads where a 100Ah battery is not enough—but you still want built-in Bluetooth, automatic cold-weather heating, and serious battery protection.
This is the battery we would look at for a clean 12V build that needs longer refrigerator, lighting, communications, pump, and inverter runtime without turning the battery compartment into a maze of smaller units. Renogy’s 200A BMS, IP67 enclosure, and double active safety system are built for year-round mobile and remote power.
Key Features
- 12.8V, 200Ah capacity with 2,560Wh of stored energy
- Built-in Bluetooth monitoring through the Renogy app
- Automatic self-heating for safe cold-weather charging
- 200A continuous charge and discharge capability
- 60+ EV-grade BMS protections plus active backup protection
- IP67 water- and dust-resistant, corrosion-resistant enclosure
- Up to 5,000 cycles at 80% depth of discharge and 80% end-of-life capacity
- Supports up to eight matching batteries in parallel
- 7-year prorated material and workmanship warranty
Best Uses
- Class B and Class C RV electrical systems
- Fifth wheels, travel trailers, and campervans
- Marine house banks and onboard electronics
- Overland vehicles and 4x4 accessory systems
- Cabins, sheds, workshops, and 12V off-grid solar systems
Full Specifications
| Battery chemistry | Lithium iron phosphate (LiFePO4) |
|---|---|
| Nominal voltage | 12.8V |
| Rated capacity | 200Ah at 0.5C, 25°C |
| Energy | 2,560Wh |
| Voltage range | 10V–14.8V |
| Maximum charge current | 200A |
| Maximum continuous discharge | 200A |
| Peak discharge | 270A for 30 seconds |
| Cycle life | 5,000 cycles at 80% DOD / 80% EOL |
| Charge temperature | -4°F to 131°F (-20°C to 55°C), using self-heating as required |
| Discharge temperature | -4°F to 140°F (-20°C to 60°C) |
| Connections | Parallel only, up to 8 matching batteries |
| Communication | Bluetooth |
| Protection rating | IP67 |
| Flame rating | UL94 V-0 |
| Dimensions | 18.4 × 8.4 × 8.2 in |
| Weight | 50.7 lb |
| Terminals | M8 × 1.25 |
| Warranty | 7-year prorated warranty |
What’s Included
- 1 × Renogy PRO 12V 200Ah smart LiFePO4 battery
- 2 × M8 × 1.25 × 12 mm terminal bolts
- 2 × M8 × 1.25 × 16 mm long terminal bolts
- 1 × user manual
Frequently Asked Questions
Can I wire this battery in series?
No. The Renogy PRO 200Ah is intended for parallel connection only. Up to eight matching batteries can be paralleled for additional 12V capacity.
When does self-heating activate?
Renogy specifies a stable charging current above 6A per battery. The heating system supports safe charging when cell temperature is below freezing conditions.
Does it need a separate Bluetooth module?
No. Bluetooth is built in for monitoring through the Renogy app and compatible Renogy monitoring products.
What size inverter can it support?
The 200A continuous discharge rating is the key limit. Inverter sizing must account for DC current, surge demand, cable length, fuse size, and system voltage. Have the complete system engineered for the intended load.
Is the battery waterproof?
It carries an IP67 rating for water and dust resistance, but it should still be installed securely in accordance with Renogy’s manual and protected from flooding, impact, and improper terminal exposure.
Share
