EcoFlow TITAN 5000 Solar Generator Bundle with 2 Renogy 400W Solar Suitcases
EcoFlow TITAN 5000 Solar Generator Bundle with 2 Renogy 400W Solar Suitcases
Couldn't load pickup availability
EcoFlow TITAN 5000 with 800W Portable Solar
This AllProGenerators package combines the EcoFlow TITAN 5000 with two Renogy 400W Lightweight Portable Solar Suitcases and a FREE 50-foot red/black 10 AWG solar extension cable pair. The two matching panels connect in series, producing approximately 80V at maximum power. That gives the TITAN’s 40–450V solar input a comfortable operating margin, even when the array is placed farther from the power station.
You get 5,017.6Wh of LFP storage, 7,200W of 120V/240V split-phase output and 800W of portable solar that folds away when you are finished. The system can expand to 30kWh with five TITAN 5kWh Extra Batteries.

Complete Bundle Contents
- 1 × EcoFlow TITAN 5000 portable power station
- 2 × Renogy 400W Lightweight Portable Solar Suitcases
- FREE 50-foot red/black 10 AWG solar extension cable pair
- 1 × EcoFlow Solar-to-HP500 charging cable
- 1 × EcoFlow AC charging cable (C20)
- 1 × Quick-start guide
- Free U.S. shipping and USA-based support from AllProGenerators
Why Two Panels Are the Correct Match
The TITAN 5000 solar input operates from 40–450V and accepts up to 16A. One Renogy suitcase operates at 40V, which sits directly on the TITAN’s minimum. Two matching panels wired in series raise the array to approximately 80V at maximum power and 94.4V open circuit while current remains about 10A. This stays well inside EcoFlow’s published input limits and gives the system useful voltage headroom for real-world conditions and the included extension cable.
Connect the panels in series as described in the manuals. Do not connect the two panels in parallel into this 16A input because the combined operating current would be approximately 20A.
Strong Solar Without Permanent Installation
Each 400W Renogy suitcase weighs 30.2 pounds and folds to 27.9 × 33.7 × 3.2 inches. The ETFE surface, fiberglass reinforcement, protected corners and built-in aluminum kickstands make these panels a good fit for emergency use, RV travel and temporary off-grid setups. They are powerful enough to matter but still manageable enough to move and store.

Best Uses
- Whole-home outage preparation with selected 120V and 240V loads
- Powering compatible central air conditioning with proper load planning
- Refrigerators, freezers, lighting, internet and medical equipment
- Hurricane and extended-grid-outage backup
- Solar charging for cabins, farms, workshops and remote property
- Customers who need portable panels instead of a fixed rooftop array
- Expandable home storage that can grow from 5kWh to 30kWh
EcoFlow TITAN 5000 Specifications
| Battery Capacity | 5,017.6Wh |
|---|---|
| Expandable Capacity | Up to 30kWh with five TITAN 5kWh Extra Batteries |
| Battery Chemistry | LFP (LiFePO₄) |
| Rated AC Output | 7,200W |
| Output Voltage / Frequency | 120V / 240V AC, 60Hz split phase |
| AC Outlets | 3 × NEMA 5-20R; 1 × NEMA L14-30R |
| USB Outputs | 1 × 60W USB-C; 1 × 18W USB-A |
| Maximum Solar Input | 4,000W; 40–450V, 16A; one MPPT input |
| Maximum AC Input | 7,200W |
| UPS Switchover | Under 20 ms with Smart Home Panel 10 |
| Connectivity | Wi-Fi and Bluetooth 5.0 |
| Energy Management | EcoFlow OASIS 3.0 |
| Dimensions | 24.5 × 13.2 × 16.9 in |
| Net Weight | 119 lb |
| IP Rating | IP20 |
| Warranty | 5 years |
800W Renogy Solar Array Specifications
| Panels Included | 2 × RSP400LSC-US |
|---|---|
| Total Rated Power | 800W at STC |
| Recommended Connection | Two matching panels in series |
| Series Operating Voltage | Approximately 80V |
| Series Open-Circuit Voltage | Approximately 94.4V at STC |
| Series Operating Current | Approximately 10A |
| Panel Efficiency | Up to 23% |
| Dimensions per Panel | 111.8 × 33.7 × 0.8 in unfolded; 27.9 × 33.7 × 3.2 in folded |
| Weight per Panel | 30.2 lb |
| Panel Protection | IP67; IP68 solar connectors |
| Panel Warranty | 3-year materials and workmanship |
Frequently Asked Questions
Why are two panels included instead of one?
The TITAN 5000 begins its solar-input range at 40V, exactly the operating voltage of one panel. Two panels in series provide about 80V and leave appropriate margin for temperature, sunlight changes and cable loss.
How should the panels be connected?
Connect the two matching Renogy panels in series, then route the string through the included extension pair and EcoFlow Solar-to-HP500 cable. Follow the current manuals and verify polarity before connection.
Can the TITAN 5000 run a whole house?
It is designed for whole-home backup applications and supplies 7,200W of split-phase power. The appliances you can operate together depend on their combined running and starting demand.
Can it run central air conditioning?
EcoFlow states that a compatible 3-ton central air conditioner can be supported without a separate soft starter when its startup requirements remain within the TITAN’s capabilities. Have the actual HVAC nameplate and starting demand checked.
How fast will 800W of solar recharge the battery?
Actual charging is lower than panel nameplate power and changes throughout the day. Battery level, active loads, sun angle, temperature, clouds and shade all affect charging time.
Can I add more solar later?
Yes. The completed array must remain within 40–450V, 16A and 4,000W under every expected condition, including cold-weather voltage rise.
Can I connect it to my home?
The built-in outlets can be used without home integration. Automatic circuit backup and supported grid connection require the compatible 240V Smart Home Panel 10 and qualified installation.
Are the panels weatherproof?
The panels are IP67, but the TITAN is IP20. Keep the power station dry and ventilated while the extension cable places the solar array outdoors.
Compare the Components
Specifications were checked against EcoFlow and Renogy’s current U.S. product information. Always follow the manuals supplied with the equipment.
Share
